 |
|
|
|
|
Part Number
|
|
Special Stainless Steel for Solenoid Valves |
||||||
|
Chemical Composition Limits |
||||||
| Weight % | C | Cr | Mo | Mn | S | Fe |
|
CHRONIFER L 18 SOLENOID |
0.06 Max | 16.00-18.50 | 0.20-0.60 | 1.50 Max | 0.35 Max | Rem |
|
Other Chemically similar Specifications |
||||||
| Weight % | C | Cr | Mo | Mn | S | Fe |
| WS 1.4105 | 0.06 Max | 16.00-18.50 | 0.20-0.60 | 1.50 Max | 0.35 Max | Rem |
| DIN X 4 CrMoS 18 | 0.06 Max | 16.00-18.50 | 0.20-0.60 | 1.50 Max | 0.35 Max | Rem |
| AISI 430FR, 430F | 0.06 Max | 16.00-18.50 | 0.20-0.60 | 1.50 Max | 0.35 Max | Rem |
| AFNOR 28 CF 17 | 0.06 Max | 16.00-18.50 | 0.20-0.60 | 1.50 Max | 0.35 Max | Rem |
| EN X 6 CrMoS 17 | 0.06 Max | 16.00-18.50 | 0.20-0.60 | 1.50 Max | 0.35 Max | Rem |
Our Chronifer L18 Solenoid material is Manufactured in Rod, Bar and coil
Magnetic standard values of the different qualities
| Qualities | 4150 IM | 4105 1E | 4105 IL | 4105 IF | 4113 IM | 4521 IU |
| Saturation Js (t) | 1.60 | 1.60 | 1.60 | 1.60 | 1.60 | 1.60 |
| Remanence: Br(T) | ap. 0.5 | 0.5-0.8 | 0.5-0.8 | 0.6-1.0 | 0.5-0.8 | 0.5-0.8 |
| Resistivity by Ohm m | 0.70 | 0.70 | 0.85 | 0.60 | 0.70 | 0.70 |
| Permeability | min 1000 | min 1000 | min1000 | min 1300 | min 1000 | min 1000 |
| Coercitive field jHc (A/m) | max 320 | max 320 | max 240 | max 200 | max 240 | max 240 |
|
4113 IM= high corrosion resistance 4521 IU = highest corrosion resistance
Available in: In bars of 3m length or other on request, chamfered (one of both ends) or both ends faced
Tolerance To standard ISO h8 (other tolerances on request)
Tensile Strength Min 400N/mm (min 58,000 lb/sq inch)
Heat Treatment Specially heat treatment to obtain the requested magnetic characteristics.
Cutting Rate 50 to 60 m/min depending on the lubrication oil, the cutting tools, the shape of the parts, etc.
Standard Stock Range Ø 4-25 mm (0.236"-0.984") standard sizes like
|
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.
Site © 2005 Quantum Alloys Ltd
HP11 2QY Tel. 44 (0) 8708 799001/2 Fax. 44 (0) 8707 652 267/8