|
Chronifer Special 71 material
is Manufactured in Rod, Bar and coil
AISI 316Ti ~ Stainless Steel
Material Properties
Type 316L Ti is an improved Corrosion
resistant Chrome-Nickel steel alloy with high content of Molybdenum and some
Titanium. It is not a typical free machining grade and therefore not
recommended for difficult high speed machining process.
Corrosion Resistance
Due to its superior Corrosion
resistance, it has been used in handling many of the chemicals used by chemical process
industries. It is more resistant to pitting Corrosion than typical 18-8
alloys for optimum corrosion resistance, surface must be free of scales and
foreign particles. Parts should be passivated.
Availability
Bars: Cold Drawn, ground/ polished
Standard length bars: 3m Surface
roughness N5
Spec. resistance:
Specific electric resistance with
~20ºC: ~0.7 (Ohm x mm2)/m
Stock Range
Round Ø 2.10 -16.00 mm
Cutting Rate
20-35 m/min (approx value,
depending on the lubrication oil, the cutting tools and the shape of
parts)
Download
Tolerance Chart
|
