|
Request
for Quotation
NICKEL 400 |
SHEET | PLATE | COIL/FOIL
| ROD | PRODUCTS
MONEL®
ALLOY 400
|
High strength, good
weldability, excellent corrosion resistance over wide range of
temperatures and conditions.
Used on:
Valves, Pumps, Shafts,
Marine Fixtures, Fasteners, Electrical and Electronic Components,
Processing equipment, Petroleum Refining and production equipment, Heat Exchangers |
NOMINAL DATA SHEET
|
|
| C - .30max |
Marine Fasteners |
| Mn - 2.00max |
Chemical
Processing Equipment |
| S - .024max |
Springs |
| Si - .50max |
Heaters |
| Ni - 63/70 |
Heat Exchangers |
| Cu - Balance |
Gasoline and Fresh Water
Tanks |
| Fe - 2.50max |
|
| Co - 1.0max |
|
| |
|
| |
| PHYSICAL
PROPERTIES (ANNEALED CONDITION) |
| Modulus of Elasticity,
Tension 10(******)psi - 26.0 |
| Magnetic
permeability at 200H(At 70 F) - |
| Electrical
Resistivity, Microhm-cm (At 70 F) - 51 |
| Density, lb/cu.in.
- .319 |
| Coefficient
of Thermal Expansion, in./in./ F x 10(-******) |
| 70 - 200 F ............................
7.7 |
| 70 - 400 F ............................
8.6 |
| 70 - 800 F ............................
8.9 |
| 70 - 1000 F ...........................
9.1 |
| |
| |
| NOMINAL
MECHANICAL PROPERTIES (ANNEALED CONDITION) |
| Ultimate Tensile Strength, psi - 70,000 |
| 0.2% Offset Yield Strength,
psi - 28,000 |
| Elongation in 2 inches
percent - 320 |
| Hardness, Rockwell - B62 |
| |
| SHEET |
PLATE |
COIL/FOIL |
ROD |
.050
.062
.078
.109
.125
.140 |
.250
.375
.500
.750
1.00 |
.003
.004
.005
.010
.015
.020
.030
.040
.050
.062 |
.125
.250
.312
.437
.500
.625
.750
.875
1.00
1.25
1.50
1.75
2.00
2.25
2.50
3.00
3.50
4.00 |
Top of Page
Disclaimer
Every
effort is made to ensure that technical specifications are accurate.
However, technical specifications included herein should be used as a
guideline only. All specifications are subject to change without notice.
|
